CalcBuild

Asphalt Cost Calculator – Estimate Your Paving Cost

Estimate the total cost of your asphalt project. Enter dimensions and price per ton to calculate materials needed and total cost.

ft
ft
in
$

Estimate only. Prices are approximate and vary by region. This is not a contractor quote. Use for planning purposes only.

Asphalt Cost Calculator Formula

Total Cost = (Length × Width × Depth/12 ÷ 27 × 1.4) × Price per Ton

Assumptions

  • Cost per ton is based on 2024–2025 national averages for the United States
  • Asphalt density is approximately 1.4 tons per cubic yard
  • Prices include material only — installation labor, grading, and base preparation are additional
  • Hot mix asphalt prices fluctuate with crude oil prices and seasonal demand

How to Calculate Asphalt Cost

  1. 1. Measure the area length and width in feet
  2. 2. Determine desired depth in inches
  3. 3. Calculate volume: Length × Width × (Depth ÷ 12) = cubic feet
  4. 4. Convert to cubic yards: cubic feet ÷ 27
  5. 5. Convert to tons: cubic yards × 1.4
  6. 6. Multiply tons by price per ton for total cost

Example Calculation

Let's say you're estimating cost for a 50ft × 20ft parking area, 3 inches deep, at $150 per ton.

  • length: 50
  • width: 20
  • depth: 3
  • pricePerTon: 150

Volume = 50 × 20 × 0.25 = 250 ft³ → 9.26 yd³ → 12.96 tons → Total cost: $1,944

Tips

  • Asphalt costs between $100–$200 per ton depending on your location
  • Residential driveways typically need 2-3 inches of asphalt over a gravel base
  • Commercial parking lots may require 3-4 inches of asphalt
  • Get at least 3 quotes from local paving contractors for the best price
  • Factor in additional costs for base preparation, grading, and sealing

Frequently Asked Questions

How much does it cost to pave a driveway with asphalt?
A typical residential driveway (600 sq ft, 3 inches deep) requires about 9.3 tons of asphalt. At $100-$200 per ton, material costs range from $930 to $1,860. Total cost including labor is typically $3-$7 per square foot.
How do I calculate asphalt tonnage?
Calculate the volume in cubic feet (length × width × depth in feet), divide by 27 to get cubic yards, then multiply by 1.4 to get tons. Add 5-10% for waste.
How much asphalt is in a ton?
One ton of asphalt covers approximately 40-80 square feet depending on depth. At 2 inches deep, it covers about 80 sq ft. At 4 inches deep, it covers about 40 sq ft.

Related Calculators

Last updated: 2026-05-23